Liebherr HC1080 安装指导
6 Cabinet door
- Two doors are required for the kitchen cabinet: a top
one for the fridge section and a bottom one for the
freezer section.
- The doors must be at least 5/8 in. (16 mm) and no more
than 3/4 in. (19 mm) thick.
- When the two doors are closed the gap between the
top and bottom door must be at least 1/8 in. (3 mm).
- The gap between the cabinet doors must be the same
as the gap between the appliance doors.
- There must be a gap of at least 1/8 in. (3 mm) between
the door and the cupboard door above it (if there is
one).
- The width of the cabinet doors depends upon the style
of the kitchen and the size of the gap between the door
panels of the cupboard. Normally a vertical gap of
1/8 in. (3 mm) should be left between the cabinet
doors.
- The upper edges of the top door and the bottom door
should be the same as the on the cupboard(s) next to it
if there are any other cupboards.
- The unit doors must be assembled flat and free from
tension.
NOTICE
An excessively heavy unit door can cause potential
damage!
If the unit door is too heavy, we cannot rule out damage to
the hinges, which may compromise the use of the unit.
u
Before installing the unit door, ensure the door does not
exceed the permissible weight.
Appliance
type
Maximum weight of unit door
Fridge compart-
ment door
Freezer compart-
ment door
HC 1070, HC
1030
30.5 lbs (14 kg)
26.5 lbs (12 kg)
Cabinet door
* Depending on model and options
5