GE GIE18GTHBB 手册

12

 1.  Secure side of handle to door and replace 

plug button.

 2.  Secure handle to top of door.

To Remove Doors
Stainless steel doors are not reversible. Follow 

these steps to remove doors.
 1.  Remove toe grille and top hinge cover.
 2.  Remove top hinge and lift freezer door off 

of center hinge pin. Set door aside.

 3.  Unscrew center hinge bin using adjustable 

wrench and save for reassembly. Ensure 

plastic washer stays on hinge pin.

 4.  Lift refrigerator door off of bottom hinge 

and set aside.

 5.  Remove center hinge and shim by 

removing inside screw and loosening two 

outside screws enough to allow hinge to 

slide out. 

 6.  Remove bottom hinge. Reinsert two 

outside screws in holes and tighten.

  7.  Reverse steps 1 - 6 to reinstall doors
To Remove Handles
 1.  Firmly hold freezer handle while loosening 

set screws with 3/32” allen wrench. 

Remove freezer handle.

 2.  Repeat step 1 for refrigerator door.

(Handles may be easier to reverse while doors 

are off.)
  1.  Remove two screws attaching handle to 

top of 

refrigerator 

door.

 2.  Remove 

button plug 

using edge of 

putty knife.

 3.  Remove 

screw on 

side of 

refrigerator 

door and 

remove 

handle.

 4.  Reverse 

freezer and refrigerator handles as shown in 

figure 3.



Trim lock must be removed and installed by 

sliding over the two donut shaped areas.

Use care when using tools near surface of 

stainless steel doors to avoid scratching.