Amana ASD2275BR 安装指导

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid 
buildup of odors. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any 
odors formed in one section will transfer to the other. You must 
thoroughly clean both sections to eliminate odors. To avoid odor 
transfer and drying out of food, wrap or cover foods tightly.

NOTE: Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners or 
gaskets. Do not use paper towels, scouring pads, or other harsh 
cleaning tools.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

3. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. 

4. There is no need for routine condenser cleaning in normal 

home operating environments. If the environment is 
particularly greasy or dusty, or there is significant pet traffic in 
the home, the condenser should be cleaned every 2 to 
3 months to ensure maximum efficiency.
If you need to clean the condenser:

■

Remove the base grille. See the “Door Removal” 
instructions, either in the User Instructions or the 
Installation Instructions and Owner’s Manual, or in the 
separate instruction sheet provided with your refrigerator.

■

Use a vacuum cleaner with a soft brush to clean the grille, 
the open areas behind the grille and the front surface area 
of the condenser.

■

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the 
bulb with one of the same size, shape and wattage. 

■

The dispenser lights are LEDs that cannot be changed.

■

On some models, the interior lights are LEDs that cannot 
be changed. 

■

On some models, the interior lights require a 40-watt bulb.

1. Unplug refrigerator or disconnect power.
2. Remove light shield when applicable. 

NOTE: To clean the light shield, wash it with warm water and 
liquid detergent. Rinse and dry the shield well.

3. Remove light bulb and replace with one of the same size, 

shape and wattage.

4. Replace light shield when applicable.
5. Plug in refrigerator or reconnect power.

1. Use up any perishables and freeze other items.
2. If your refrigerator has an automatic ice maker and is 

connected to the household water supply, turn off the water 
supply to the refrigerator. Property damage can occur if the 
water supply is not turned off. 

3. If you have an automatic ice maker, turn off the ice maker. 

NOTE: Depending on your model, raise the wire shutoff arm to 
OFF (up) position or press the switch to OFF (right).

4. Empty the ice bin.
If You Choose to Turn Refrigerator Off Before You Leave:

1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:

■

Turn off the water supply to the ice maker at least one day 
ahead of time.

■

When the last load of ice drops, raise the wire shutoff arm 
to the OFF (up) position or move the switch to the OFF 
(right) setting.

3. Depending on the model, turn the Refrigerator Control to OFF 

or turn cooling off. See “Using the Controls” in the User 
Instructions, User Guide, or Use & Care Guide.

4. Clean, wipe, and dry thoroughly.
5. Tape rubber or wood blocks to the tops of both doors to prop 

them open far enough for air to get in. This stops odor and 
mold from building up.