Bosch B30BB830SS 操作指南

 

The ice maker doesn’t work.

Ice maker is not connected 

to the mains supply.

Call customer service.

Ice maker does not contain any fresh 

water.

Ensure that the water is properly connected. 

The freezer compartment temperature 

is too warm.

Check freezer compartment temperature 

and, if required, set slightly colder.

The ice maker does not make 

enough ice or the ice is 

deformed.

The appliance or ice maker has only 

just been switched on.

Approx. 24 hours is needed until ice pro-

duction starts.

A lot of ice has been taken.

Approx. 24 hours is needed until the ice 

cube container is filled again.

Low water pressure.

Connect the appliance to the stipulated 

water pressure only (see chapter Connect-

ing appliance, section Water connection).

The water filter is bunged up or used. Change the water filter.

The ice maker does not make 

any ice.

The ice maker is switched off.

Switch the ice maker on at the control 

panel.

The appliance is not supplied with 

water.

Contact the installer or the water supply 

company.

Water supply has kinks.

Turn off the water supply at the shut-off tap. 

Smoothen out the kinks, exchange where 

necessary.

Low water pressure.

Connect the appliance to the stipulated 

water pressure only (see chapter Connect-

ing appliance, section Water connection).

Temperature in the freezer space is 

too warm.

Set temperature slightly colder in the freezer 

compartment.

Ice cube container is not properly 

inserted.

Check the position, re-insert where neces-

sary.

Incorrect shut-off tap installed.

Incorrect taps can cause low water pressure 

and damage to the appliance.

Ice forms in the inflow hose 

to the ice maker.

Low water pressure.

Connect the appliance to the stipulated 

water pressure only (see chapter Connect-

ing appliance, section Water connection).

Shut off tap incorrectly opened.

Open shut off tap fully.

Temperature in the freezer space is 

too warm.

Set temperature slightly colder in the freezer 

compartment.

Water runs from the appliance. The water connection hose is not 

properly sealed.

Replace the hose with a manufacturer’s 

original part.

Incorrect shut-off tap installed.

Incorrect taps can cause low water pressure 

and damage to the appliance.

The water pressure is less than 

usual.

Low water pressure.

Connect the appliance to the stipulated 

water pressure only (see chapter Connect-

ing appliance, section Water connection).

Shut off tap incorrectly opened.

Open shut off tap fully and check for leaks. 

Check the minimum through flow.

Incorrect shut-off tap installed.

Incorrect taps can cause low water pressure 

and damage to the appliance.

Water supply has kinks.

Turn off the water supply at the shut-off tap. 

Smoothen out the kinks, exchange where 

necessary.

The water filter is bunged up or used. Change the water filter.