Whirlpool W3CG3014XW 安装指导

Decide on the final location for the cooktop. Avoid drilling into or 
severing existing wiring during installation.

1. Using 2 or more people, place the cooktop upside down on a 

covered surface.

2. Remove foam strip from the package containing literature. 

Remove backing from foam strip. Apply foam strip adhesive-
side down around bottom of cooktop, flush with edge.

NOTE: The foam strip keeps debris away from the underside 
of the cooktop and helps the cooktop to sit flat on uneven 
counters.

IMPORTANT: Clamping brackets should not be used.

1. Using 2 or more people, place cooktop right side up into the 

cutout.

NOTE: Make sure that the front edge of the cooktop is 
parallel to the front edge of the countertop. If repositioning is 
needed, lift entire cooktop up from cutout to avoid scratching 
the countertop.

1. Determine whether your cabinet construction provides 

clearance for installing clamping brackets at cooktop base 
ends. This is the recommended location. Clamping brackets 
can be installed on the front and back of cooktop base 
bottom, if necessary. 

2. The clamping brackets can be installed before or after the 

cooktop is placed into the cutout. Complete the following 
steps for the option you choose.

1. Using 2 or more people, place the cooktop upside down on a 

covered surface.

2. Remove the attachment screws for the selected bracket 

locations from the bottom of the cooktop base. 

3. Select bracket mounting holes that will allow the bracket to 

extend far enough out from the cooktop for the installation of 
2½" (6.4 cm) clamping screws. See “Attach Cooktop to 
Countertop” for illustration of clamping screw installation. 

4. Attach brackets to cooktop base bottom with bracket 

attachment screws using the bracket mounting holes 
selected in Step 2.

5. Rotate brackets so they do not extend beyond edge of 

cooktop base.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

A

B

C

A

B

C
D

E

A

B

C

D