Electrolux EIFLS60JIW 使用和维护

下载
页码 30
16
Cycle Settings
Operating Instructions
The appropriate washing temperature will auto-
matically be indicated for the cycle selected.
       NOTE
To change the temperature once the cycle has 
begun, press the pause button, make the new 
selection and press start again.
To change the temperature, press the Tempera-
ture
 button to scroll to the desired setting. Select a 
wash water temperature according to fi ber content, 
colorfastness and soil level. A cold water rinse saves 
energy and reduces wrinkling.
To protect your fabrics, not all temperatures are 
available with every cycle. The indicator will not light 
if the setting is not available with that cycle.
The temperature selected for the cycle will be 
remembered and recalled each time that cycle is 
selected in the future.
Follow the fabric care label instructions 
on items to be washed.
For best results
All wash water temperatures are automatically 
regulated to maximize detergent effectiveness and 
improve washing performance. The water heater 
setting and its distance from the washer, water 
usage in other parts of the home, and seasonally 
low ground water temperature in some geographic 
areas can affect water temperature.
SANITIZE
This setting sanitizes heavily soiled colorfast fabrics 
such as towels, bedding, and children’s clothing by 
killing 99.9% of bacteria using wash water heated 
with a boost heater to 152° F (67° C). Cold water is 
used to cool and rinse the load. This setting is only 
available with the deep clean sanitize cycle.
Maxhighmedium, and low spin speeds are 
available for each cycle. The spin speed and/or 
duration of fi nal spin vary from cycle to cycle.
Increasing the spin speed will extract more water, 
decrease drying time and conserve energy. De-
creasing the spin speed will reduce wrinkling.
Use no spin to omit the fi nal spin at the end of the 
cycle. The load will be very wet. Remove items from 
the wash drum to drip dry or select the rinse & spin 
cycle to remove excess water at a more convenient 
time.
Adjust the wash time in 3-minute increments based 
on the soil level of each load. Maxheavynormal
light and extra light soil levels are available.
Spin Speed
Washing Temperature
Soil Level
HOT
Use this setting for heavily soiled white or colorfast 
cottons and blends.
WARM
Use this setting for normally soiled white or colorfast 
cottons or blends.
COLD
Use this setting for lightly soiled non-colorfast items, 
knits, delicates, and hand washables.
ECO COLD
Wash and rinse temperatures are equivalent to tem-
perature of cold tap supply. Use this selection for 
fabrics and colors that are prone to dye transfer. For 
use with cold water 
 detergents.
To return to factory settings, 
press these two buttons at the 
same time and hold until the 
signal sounds.