Summit SWC6GBLCSS 使用和维护

 

•  Remove the interior and exterior packaging 
•  Before connecting the appliance to the power source, let it stand upright 

for approximately 2 hours. This will reduce the possibility of a 
malfunction in the cooling system from handling during transportation. 

•  Clean the interior surface with lukewarm water using a soft cloth. 

 

These instructions for use are intended for the user.  They describe the appliance and 
the correct and safe way to use it.  The instructions were prepared for various 
types/models of refrigerators therefore you may find in it descriptions of some 
accessories and functions that your appliance may not have. 

 

•  Our appliances are distributed in packaging made of environmental 

friendly material which could safely be recycled, disposed of or 
destroyed without any effects on the environment whatsoever. 

•  Our instruction manuals are printed either on recycled paper or 

chlorine free bleached paper. 

•  Try not to open the door too often, especially when the weather is hot 

and humid.  Once you open the door try to close it as soon as possible. 

•  Every now and then check if the appliance is sufficiently ventilated 

(adequate air circulation behind the appliance). 

•  Set thermostat from higher to lower settings as soon as possible 

(depending on how loaded the appliance is, the ambient temperature 
etc...). 

•  The coils on the rear of the refrigerator should be cleaned and free of 

dust or any other impurities. 

•  Ice and frost layer increase energy consumption, so do clean the 

appliance as soon as the layer is 1/8” thick. 

•  Always consider instructions stated in sections Positioning and Energy 

Saving Tips, otherwise the energy consumption is substantially higher. 

•  Do not place hot foods in the refrigerator.  

•  A cool dry place allows your refrigerator to operate more efficiently so 

keep the refrigerator away from stoves and other heat sources. 

 
 
 

 

Instructions for Use