CoolIT Domino A.L.C. DM-1000 用户手册
产品代码
DM-1000
Step 1: Prepare CPU and Install Backplates
Open the side panel of the computer case and if possible, lay the case on its
side. Remove the exhaust fan from the rear of the case as shown (Fig 3).
side. Remove the exhaust fan from the rear of the case as shown (Fig 3).
I
NSTALLATION
P
ROCEDURE
Important: In order to power the system, select an appropriate 3 or 4‐pin fan
header to power Domino A.L.C.. Confirm that all Thermal Regulation systems
(e.g., Smart Fan or Q‐Fan) are disabled and the header is configured to
deliver 100% power. Refer to BIOS information in your Motherboard manual.
header to power Domino A.L.C.. Confirm that all Thermal Regulation systems
(e.g., Smart Fan or Q‐Fan) are disabled and the header is configured to
deliver 100% power. Refer to BIOS information in your Motherboard manual.
For LGA 775/1366 Motherboards
Remove OEM heat sink from motherboard by turning each post counter‐
clockwise then pulling the post up and away from the motherboard (Fig 4).
Clean Thermal Compound from CPU Cap (IHS) using a paper towel or a clean
cloth (Fig 5).
clockwise then pulling the post up and away from the motherboard (Fig 4).
Clean Thermal Compound from CPU Cap (IHS) using a paper towel or a clean
cloth (Fig 5).
Figure 3
Figure 4
Figure 5
Changing Operation Modes
Domino A.L.C. has 3 selectable operation modes: Quiet, Performance and
Full. The system automatically adjusts in all modes to ensure operation is
maintained within safe temperature ranges.
Full. The system automatically adjusts in all modes to ensure operation is
maintained within safe temperature ranges.
O
PERATING
I
NSTRUCTIONS
Display
Audible
Confirma‐
tion
Quiet
Ultra quiet operation while provid‐
ing robust overheat protection,
even at high temperatures
ing robust overheat protection,
even at high temperatures
1 Beep
Perform‐
ance
ance
Fan speed automatically adjusts
for optimum quiet cooling per‐
formance
for optimum quiet cooling per‐
formance
2 Beeps
Full
Maximum cooling performance
3 Beeps
Mode
Domino A.L.C. is shipped with the Performance operation mode selected.
To switch operation modes, repeatedly press the Mode button until the
desired mode is displayed on the display. The corresponding number of
beeps will sound to confirm the selection.
To switch operation modes, repeatedly press the Mode button until the
desired mode is displayed on the display. The corresponding number of
beeps will sound to confirm the selection.
Changing Temperature Scale
Domino A.L.C. is shipped with the Celsius temperature scale activated. To
switch to Fahrenheit, proceed as follows:
• Press and hold the Mode button. After 3 seconds the display will flash
switch to Fahrenheit, proceed as follows:
• Press and hold the Mode button. After 3 seconds the display will flash
one temperature scale then the other.
• Release the Mode button when the desired temperature scale is shown.