Dacor DCT365SLP 业主指南
9
Care and Cleaning
SimmerSear Burner Assembly
Inner burner cap
Outer burner cap
Igniter on
burner base
Top of burner
base
Burner ring
slots
Cleaning the Burners and Igniters
CAUtION
Use care while cleaning the igniters. The porcelain is
fragile and can crack or break.
IMPORTANT: Dirty or wet igniters may not work
properly or may not spark at all. Also the ignit-
ers may not work if any other burner parts are not
clean.
Check for any dirt or grime deposited on the indi-
Check for any dirt or grime deposited on the indi-
vidual burner parts, or the igniters.
1. Clean completely around the igniter, including
1. Clean completely around the igniter, including
over and under the edge of the metal top and
porcelain base. A firm toothbrush is also ideal for
this task. Use care while cleaning because the
porcelain is fragile and can crack or break. Do
not use water to clean the igniters. If necessary,
use a small amount of rubbing alcohol to help
dissolve grime.
Continued...
Standard Burner Assembly
Burner cap
Igniter on
burner base
Burner ring
slots
CAUtION: Top of
igniter is sharp
2. Examine the burner rings and the top of the
SimmerSear burner base. Remove anything
stuck in the slots with a straightened paper clip,
wire or needle. Be careful not to scratch, deform
or damage the ring and base. Do not distort the
shape of the slots. Since the SimmerSear burner
base is not removable, it must be cleaned in
place.
3. Clean all the burner parts, including the Sim-
merSear burner base, with window cleaner
or rubbing alcohol. Use a cleaning brush with
plastic bristles or a firm tooth brush. When done,
rinse the parts well with clean water. Dry all the
parts thoroughly before re-assembling them.
4. Reassemble the cooktop according to the burner
and grate assembly instructions on page 5.
Test the burners after reassembling them. If
the flame is uneven, be sure that all the burner
parts are properly positioned, then check for any
remaining dirt or grime on the burner parts or
igniter. If erratic clicking is still present, make
sure the igniter is completely dry. If the unit still
exhibits problems after drying, call your local
Dacor Authorized Service Agent.
Stainless Steel Surfaces Including Spill Tray
CAUtION
• Always wipe stainless steel (silver colored) surfaces
with the grain. To prevent scratching, do not use
abrasive cleaners or scrubbers on stainless steel
surfaces.
• Use stainless steel cleaner only on stainless steel
surfaces.
• The spill tray and the panels surrounding it
are made of high quality stainless steel. Clean
stainless steel surfaces with the Dacor Stainless
Steel Cleaner included with your cooktop. Use it
according to the directions on the package. You
may order additional stainless steel cleaner at
www.everythingdacor.com. Order part# A302.
• You may also clean the stainless steel surfaces
with a mild solution of detergent and warm
water. Rinse and dry with a soft, lint-free cloth.