Dacor ETT3041 用户指南
33
OFF
12
11
10
9
8
7
6
5
4
3
2
1
OFF
12
11
10
9
8
7
6
5
4
3
2
1
OFF
12
11
10
9
8
7
6
5
4
3
2
1
OFF
12
11
10
9
8
7
6
5
4
3
2
1
OFF
12
11
10
9
8
7
6
5
4
3
2
1
6"
1500W
7"
1800W
800W
7"
1800W
5 1/2"
1200W
5 1/2"
1000W
9"
2400W
Model CERB365
Top View
Bridge Burner
(CERB/METB Models Only)
Your CERB/METB electric cooktop offers a
convenient cooking feature. The bridge burner
has controlled heat zones allowing various
pot and pan applications on this three-in-one
burner. The bridge burner has three cooking
zones identified by the lines on the right side of
the cooktop. Each zone has a separate heating
element. In the front of the bridge is a round
element seven inches in diameter that is rated
at 1800 watts. This front element of the bridge
burner is individually controlled for use with a
pot or pan as large as eight inches in diameter.
The back burner area of the bridge burner,
also a round element seven inches in diameter,
is rated 1800 watts makes this another great
individual burner for a pot as large as eight
inches in diameter. In the center of the bridge
burner is a bridge element rated at 800 watts,
which operates in conjunction with the back
burner element.
To turn on bridge element
(CERB Model)
:
A single control knob operates the back burner
element and the bridge element. To turn on the
entire bridge element to a setting of medium,
push and turn the right rear knob clockwise to
number 6. Then push and turn the right front
knob to number 6.
Ø
12
10
8
6
4
2
10
12
8
6
4
2
Control
Knob
Bridge burner
control range
temperature
settings 1-12
Upper burner
control range
temperature
settings 1-12
CER304/CERB365 Control Knob
MET Models
To turn the element on, tap the “ON/OFF” key
then glide your finger across the settings below
the numbers which correspond to the element
power. At any time while the element is on, you
may glide your finger up or down the scale to
adjust its heat.
The dual element, located in the front left burner,
can be activated after the “ON/OFF” key has
been pressed. At any time during the cooking
process, the small dual element indicator can
be tapped to turn the element on or off. It will
illuminate when the outer ring is activated.
To turn an element off, tap the Cancel/ Secure
key. You may turn off all active elements at the
same time by tapping twice on the Dacor logo
below the controls.
MET Secure Lockout
To avoid accidentally turning the cooktop on
while cleaning it, activate the “Secure Lockout”
feature.
Model MET304
Top View
Model METB365
Top View
������
������
������
������
7 1/2”
1800W
7”
1500W
6”
1200W
9 3/4”
2400W
5 1/2”
1000W
MET304/METB365 Controls
������
������
������
������
������
7”
1800W
6 1/2”
1500W
6”
1200W
7”
1800W
800W
9 3/4”
2400W
5 1/2”
1000W
CANCEL • SECURE
ON/OFF
ON/OFF
ON/OFF
ON/OFF
To turn on bridge element
(METB Model)
:
To turn the bridge element on, select the front
right control and the back right control. Tap the
“ON/OFF” keys then glide your finger across
the settings to the desired temperature. Tap the
BRIDGE BURNER ICON on the right side of the
bottom slide control. This will activate the middle
bridge element and can be turned on or off by
pressing this icon while the burner is on. The
heat of the bridge element is controlled along
with the front element.
Note: Ask your dealer about the DACOR AMG11
Griddle. This Griddle is designed for the DACOR
bridge burner. DO NOT BRIDGE A GRIDDLE
ACROSS TWO BURNERS UNLESS YOU
HAVE THE METB/CERB BRIDGE ELEMENT.
Bridging across two elements will create stress
on the cooktop which can result in cracking.
Selecting Proper Cookware
For best results, a few simple guidelines should
be followed: use medium to heavy gauge metal
cookware with flat, thick and smooth bottoms
for greatest efficiency. Glass cookware should
only be used as recommended by the cookware
manufacturer
IMPORTANT:
In no instance should a support, such as
a wok ring or trivet, be placed directly on
the cooking surface. This may result in
scratching of the glass ceramic top.
WARNING:
To avoid electrical shock or burns, turn off
all controls and ensure the cooktop is cool
before cleaning.
IMPORTANT:
Do not use harsh or abrasive cleaning
agents, waxes, polishes, or commercial
cooktop cleaners to clean the cooktop.
Care and Cleaning Instructions
Glass Ceramic Top
Clean the top surface thoroughly before
operating the cooktop for the first time. Apply
about 1/4 teaspoon of non-abrasive cleaner,
such as the Cooktop Cleaning Creme supplied,
to the surface of the ceramic glass with a lightly
dampened clean cloth. Use a second clean
cloth to remove any remaining cleaner residue.
Wipe the cooktop surface with a dry cloth to
completely eliminate any remaining moisture.
The cooktop surface should be maintained by
repeating the above procedure during or after
each use. Be careful not to wipe or clean any
hot areas to avoid personal injury. It should be
safe to clean each element area whenever the
corresponding element residual heat indicator
light has gone out.