Monogram ZDP304NPSS 安装指导

• Install bottom cover over the bottom support while

driving one screw into each side.

• Hold top cover in place while marking screw

locations, just below shelf support and onto bottom
cover.

• Remove the shelf and drill a 9/64" diameter 

hole in the pencil-marked locations.

• Mount the top cover over the top support 

and secure the front cover with screws through 
the drilled holes on each side.

• Install screws through each top corner.

• Hold the bottom cover over the bottom support 

while driving one screw (provided) into each side. 

• Place the top cover with shelf over the top wall 

support. If you have access to the sides, secure 
the panel with two screws on each side.

• Secure the top cover with shelf to the top 

support with screws through the front of the panel,
at the top corners. Use one screw on each side.

Shelf

Install 
Screw

Cover Panel

Install 
Screw

Mark Screw Locations
for Alternate Method

Install Screw in Top Corner on Each Side

Install Screw 
on Each Side

Install Corner Screws