Frigidaire MWV150KB 安装指导
INSTALLATION OVERVIEW
B1.
Prepare Rear Wall
B3.
Attach Mounting Plate to Wall
B4.
Prepare Top Cabinet
B5.
Adjust Blower
B6.
Mount the Microwave Oven
IMPORTANT NOTES:
•
Make sure the screws for the
blower motor and blower plate
are securely tightened when
they are reinstalled. This will
help to prevent excessive
vibration.
blower motor and blower plate
are securely tightened when
they are reinstalled. This will
help to prevent excessive
vibration.
•
Make sure the motor wiring has
been properly routed and secured,
and that the wires are not pinched.
been properly routed and secured,
and that the wires are not pinched.
Remove and save the screw that holds the blower
plate to the microwave. Lift off the blower plate.
plate to the microwave. Lift off the blower plate.
Back of
Microwave
Microwave
Installation Instructions
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
FOR OUTSIDE BACK EXHAUST
B1.
You need to cut an opening in the rear wall for
outside exhaust.
outside exhaust.
•
Read the instructions on the REAR
WALL TEMPLATE.
WALL TEMPLATE.
•
Tape it to the rear wall, lining up with the
holes previously drilled for holes A and B
in the wall plate.
holes previously drilled for holes A and B
in the wall plate.
•
Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
REAR WALL TEMPLATE.
B2.
OUTSIDE BACK EXHAUST
(Horizontal Duct)
B
Blower Plate
16
REMOVE BLOWER PLATE
B2.
Remove Blower Plate