GE PSE25KSHSS 业主指南

Tactile-LED Dispenser Control
The temperature controls can display both the SET temperature as well 

as the actual temperature in the refrigerator and freezer. The actual 

temperature may vary slightly from the SET temperature based on 

usage and operating environment.

„

   On some models, setting both controls to the warmest setting until 

the display flashes (off) will stop cooling in both the freezer and 

refrigerator compartments.

„

  On other models, setting either control to the warmest setting 

until the display flashes (off) will stop the cooling to the freezer and 

refrigerator.

„

  NOTE: Turning the refrigerator off via the controls on the touch 

panel does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the 

temperature controls. If this film was not removed during installation, 

remove it now.
Touch-LED Dispenser Control:
To change the temperature, press and release the FREEZER 

TEMP/FRIDGE TEMP pad. The SET light will come on and 

the display will show the set temperature. To change the 

temperature, tap either the 

 or 

 pad until the desired 

temperature is displayed.

Once the desired temperature has been set, the temperature 

display will return to the actual refrigerator and freezer 

temperatures after 5 seconds. Several adjustments may be 

required.  Each time you adjust the controls, allow 24 hours for 

the refrigerator to reach the temperature you have set.
The temperature controls can display both the SET temperature as well 

„

   On some models, setting both controls to the warmest setting until 

the display flashes (off) will stop cooling in both the freezer and 

refrigerator compartments.

„

  On other models, setting either control to the warmest setting 

until the display flashes (off) will stop the cooling to the freezer and 

refrigerator.

„

  NOTE: Turning the refrigerator off via the controls on the touch 

panel does not shut off electrical power to the refrigerator.

Touch-LED Dispenser Control:
Press and release the FREEZER TEMP/FRIDGE TEMP pad. 

Press

to set freezer temperature to 5. The display will 

show OFF. To turn the unit back on, press the FREEZER 

TEMP/FRIDGE TEMP pad. Press

 to set the freezer and 

refrigerator temperatures to the preset points of 0°F (-18°C) 

for the freezer and 37°F (3°C) for the refrigerator.
When the unit is turned back on, it will take up to 24 hours 

to stabilize.

The Performance Air-Flow System is designed to maximize 

temperature control in the refrigerator and freezer 

compartments. This unique special feature consists of the 

Air Tower along the back wall of the refrigerator and the Air 

Tunnel on the bottom portion of the freezer rear wall. Placing 

food in front of the louvers on these components will not affect 

performance. Although the Air Tower and the Air Tunnel can 

be removed, doing so will affect temperature performance. 

(For removal instructions, on-line, contact us at ge.com or call 

800.GE.CARES. In Canada, contact us at geappliances.ca or call 

1.800.561.3344.)

5