GE GIE18GSHSS 手册

下载
页码 19
4
Raise
Stationary 
Front 
Roller with 
Leveling 
Screw
(some 
models)
This Use & Care Manual provides specific
operating instructions for your model. Use the 
refrigerator only as instructed in this Use & Care 
Manual. Before starting the refrigerator, 
follow these important first steps.
Location
•  Choose a place that is near a grounded 
electrical outlet. Do Not use an extension 
cord or an adapter plug.
•  If possible, place the refrigerator out of 
direct sunlight and away from the range, 
dishwasher or other heat sources.
•  The refrigerator must be installed on a floor
that is level and strong enough to support 
a fully loaded refrigerator.
•  Consider water supply availability for models 
equipped with an automatic ice maker.
Installation
Installation Clearances
•  Allow the following clearances for ease 
of installation, proper air circulation, and 
plumbing and electrical connections:
 
Sides & Top 
3/8”
 Back 
 1”
Raise
Adjustable 
Front 
Roller
(some 
models)
Door Opening
Your refrigerator should be positioned to allow 
easy access to a counter when removing food. 
Leveling
All four corners of your refrigerator must rest 
firmly on a solid floor. Your refrigerator is
equipped with adjustable front rollers or front
leveling screws to help level your unit. 
To Level Your Refrigerator:
 1.  Remove toe grille.
2.  Use flat-blade
screwdriver 
or 3/8” socket 
wrench to adjust 
front rollers. 
Use adjustable 
wrench to adjust 
leveling screws.
INSTALLATION
To make this possible, the direction in which 
the doors open can be reversed. See Door 
Removal & Reversal Instructions.
CAUTION
Do Not install the refrigerator where the 
temperature will drop below 55°F (13°C) or 
rise above 110°F (43°C). The compressor 
will not be able to maintain proper 
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front 
of your refrigerator. Sufficient air circulation
is essential for the proper operation of your 
refrigerator.
IMPORTANT
If you install your refrigerator in a garage or 
other unheated area, you may experience 
freezer temperature problems during the winter 
months when temperatures dip below 55° F.
Upgrading your refrigerator with a Garage 
Kit will lower the minimum operating 
temperature of your unit to 34° F. This 
kit can be ordered through the Electrolux 
Solutions Hotline (see back cover).
NOTE
If you see black coils/tubing on the back 
of your refrigerator (air-cooled condenser) 
leave 3” clearance at top of refrigerator.
NOTE
If your refrigerator is placed with the door 
hinge side against a wall, you may have to 
allow additional space so the door can be 
opened wider.
NOTE
Raise the front of the refrigerator enough so 
the doors close freely when opened halfway. 
The refrigerator should slope ¼” to ½” from 
front to back. Then level the refrigerator 
from side to side.