Speed Queen ADEE8RGS173TW01 业主指南

Dryer Symptom

Possible Cause/Solution

Clothes are too wrinkled

• Check heat setting. Overdrying can cause wrinkling.
• Check load size. Large loads may not tumble properly and may

cause wrinkling.

Clothes have odor

• Check room for odors before drying clothes. Any odor (fried

foods, paint, varnish, cleaners, burning wood, etc.) will transfer
to clothing as the dryer draws air from the room.

• Ventilate room before drying clothes.

Cycle advances too slowly

• When in an Auto-Sensing cycle, the time it takes depends on

the type and size of the load being dried. When clothing has
more moisture, the cycle takes longer than when the clothes
are more dry.

Er, ro on digital display

• The dryer’s motor overload protector has cycled.
• The control can be cleared by pressing the Start/Pause button

and the dryer can be restarted by pressing the Start/Pause
button again.

• If this code is displayed again, remove the dryer from use and

call a service person.

Contact Information

If service is required, contact the nearest Factory Authorized
Service Center. To find the nearest service center, visit us online at
www.speedqueen.com.

If you are unable to locate an authorized service center or are un-
satisfied with the service performed on your unit, contact:

Speed Queen
Shepard Street

P.O. Box 990
Ripon, Wisconsin 54971-0990
www.speedqueen.com
Phone: (920)748-3121

Date Purchased __________________________

Model Number __________________________

Serial Number __________________________

DRY2030N_SVG

1. Serial Plate

When contacting us about your washer, PLEASE GIVE THE MODEL
AND SERIAL NUMBERS. The model and serial numbers are located
on the serial plate. The serial plate will be in the location shown.

Please include a copy of your bill of sale and any service receipts
you have.

Troubleshooting

Part No. 515162