Viking TVDR3602GAW 安装指导

18

1

Measur

ement (A)

Measur

ement (A)

Me

as

ure

me

nt 

(A

)

+1

/4” 

+1

/4

” (.

64 cm)

(.6

4 c

m)

Measur

ement (A)

+1

/4” 

(.64 cm)

X

2

3

4

Measure from fl oor to bottom 

of the anit-tip opening located on the back of 

range. This will be measurement (A).

Locate anti-tip bracket on rear wall with the top left corner at 

measurement (A) plus 1/2” (1.3 cm) from the fl oor and “X” from 

where the right side of range (facing range) is to be located.

Mark and drill holes where bracket will be located.

Attach bracket with mounting hardware provided.

Range 
Width

“X” 

Dimension

36”

8” (20.3 cm)

48”

5” (12.7 cm)

TIPPING HAZARD
To reduce the risk of the 
appliance tipping, it must 
be secured by a properly installed anti-

tip bracket(s). To make sure the bracket has been installed 
properly, look behind the range with a fl ashlight to verify 
proper installation engaged in the rear bottom left corner of 
the range.  
• THIS RANGE CAN TIP.
• A CHILD OR ADULT CAN TIP THE RANGE AND BE KILLED.
•  FAILURE TO INSTALL THE ANTI-TIP DEVICE CAN RESULT IN 

DEATH OR SERIOUS BURNS TO CHILDREN OR ADULTS.

•  IF THE RANGE IS MOVED THEN THE ANTI-TIP DEVICE MUST 

BE RE-ENGAGED.

Your range is shipped standard with two types of anti-tip devices.  
Type 1 is a wall mount  device which can be used for all installation 
applications.  Type 2 is a fl oor mount device which can be used 
for all applications other than when the range is installed on a 
concrete sub-fl oor.  

Important: The range MUST be installed with one of the anti-tip 
devices.