Viking TVDR3604B 安装指导

12

•  All openings in the wall behind the appliance and in the fl oor under the appliance must 

be sealed.

• Do not obstruct the fl ow of combustion and ventilation air.

Remove and discard all packing materials, including cardboard and tape on the outside 
and inside of the range.  Remove the burner grates from its packaging off  the top cooking 
surface. The burner caps are shipped in a cardboard box located inside the oven cavity.

Do not discard the anti-tip metal brackets (2)  supplied with the range. This is the anti-tip device 
and must be installed with the unit. Refer to “Anti-tip Device Installation” section.
 
Some parts may have a plastic protective wrap which must be peeled off . The interior should be 
washed thoroughly with hot, soapy water to remove fi lm residues and any dust or debris before 
being used, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

 Avoid any damage to oven vents. The 
vents need to be unobstructed and 
open to provide proper airfl ow for 
optimal oven performance.

Legs are packed in cardboard top pack. 

Note: Legs should be installed near to where 

appliance is to be used, as they are not secure for 

long transit.

Note: It is strongly recommended that a pallet or lift 

jack be used rather than tilting.  Raise unit about a 

foot. Unscrew shipping bolts from couplings on all 

four corners.

Screw legs into couplings on all four corners.

Lower range gently to keep any undue strain 

from  legs and internal mounting hardware.

1

1

1

2

3

2

3

4