Perlick H50IMS 操作指南
6
4. SET UP
1) Unpack the Ice Maker, and remove all shipping cartons, tapes and packing BEFORE
operating the unit. Be careful not to damage the exterior panels when handling the
Ice Maker.
Ice Maker.
2) Position the Ice Maker in a selected site. Clean the interior with soap and water and rinse
thoroughly.
3) Level the Ice Maker in both the left-to-right and the front-to-rear directions.
BUILT-IN INSTALLATION
[a] CHECKING INSTALLATION SITE
Ensure 15" (381mm) wide space for building in the Ice Maker.
1) To build in between two units:
2) To build in between a unit and a wall or a
tall unit:
Fig. 2
Min. 34"
15"
Secure
Fix the counter on the wall with a bracket or
the like. Ensure 15" (381mm) wide, min. 34"
(864mm) high space for the Ice Maker.
the like. Ensure 15" (381mm) wide, min. 34"
(864mm) high space for the Ice Maker.
IMPORTANT
Do not let the counter directly weigh
down the Ice Maker.
down the Ice Maker.
Fig. 1