Monogram ZBD1850NII 安装指导
8
Turn Legs
to Adjust
Installation Instructions
STEP 10 LEVEL DISHWASHER
IMPORTANT
– Dishwasher must be level for proper
dish rack operation and wash performance.
• Make sure 1/2" minimum gap is maintained (see Figure T).
• Place level on door to check that the dishwasher is level side-
• Make sure 1/2" minimum gap is maintained (see Figure T).
• Place level on door to check that the dishwasher is level side-
to-side. Place level on rack track inside tub to check that the
dishwasher is level front-to-back.
dishwasher is level front-to-back.
���
��������
�����
�����
�������
���
���������
�����
������
�������
�������
• If the dishwasher is not level, adjust the four leveling legs
individually.
Tip: Pull lower rack out, about halfway. Check to be sure the
rack does not roll forward or back into dishwasher. If the rack
rolls in either direction, the dishwasher must be leveled again.
rolls in either direction, the dishwasher must be leveled again.
• If door hits the tub, the dishwasher is not installed correctly.
Adjust leveling legs to align door to tub.
IMPORTANT
– After leveling, verify that the
dishwasher is still in the correct position shown in
Step 9.
Step 9.
Figure X
Figure Y
STEP 11 SECURE DISHWASHER TO
COUNTERTOP OR CABINET
In this step you will need
the 2 Phillips special head
screws set aside prior to
Step 1. The dishwasher
must be secured to the
countertop or the cabinet
sides. When countertops
are made of wood,
use Method 1. When
countertops are granite or
other materials that will not
accept screws, use Method
2 to secure dishwasher at the sides.
must be secured to the
countertop or the cabinet
sides. When countertops
are made of wood,
use Method 1. When
countertops are granite or
other materials that will not
accept screws, use Method
2 to secure dishwasher at the sides.
IMPORTANT
–
Drive screws straight
and flush. Protruding
screw heads will
scratch the top or
sides of the control
panel and can interfere
with door closing.
and flush. Protruding
screw heads will
scratch the top or
sides of the control
panel and can interfere
with door closing.
Method 1
Secure dishwasher to wood countertop
• Fasten the dishwasher to the underside of the countertop
• Fasten the dishwasher to the underside of the countertop
with the 2 Phillips special head screws provided.
Method 2
Secure dishwasher with side-mounting brackets
• Remove plug buttons (one on each side).
• Install screws through the dishwasher side mount bracket
• Remove plug buttons (one on each side).
• Install screws through the dishwasher side mount bracket
and into the adjacent cabinet on each side. Reinstall plug
buttons.
buttons.
Figure BB
��������
��������
����������������
Figure CC
����
����
����������
���������������
�������
Figure DD
Figure Z
When step is complete, close dishwasher door and verify that
gap between countertop and top of dishwasher door is at
least 1/2".
gap between countertop and top of dishwasher door is at
least 1/2".
Either Method
Figure AA
2514C
Screws
Plug Buttons
Granite Countertop
Countertop
Mounting
brackets
Side-Mounting
Bracket
11