Best DD01 规格说明表单

下载
页码 2
SPECIFICATION SHEET
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Exhaust your cooktop without the use of an
overhead hood. Compact design is installed directly
behind cooktop.
FEATURES
HOUSING:
Rugged steel construction
Finished with silver paint
Space-saving - can be used with most cooktops on the
market
30", 36", or 48" widths - Fits standard-size cabinets
BLOWER:
Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal
blower wheel for quiet, efficient performance
Permanently lubricated, thermally-protected motor
Neoprene, resilient anti-vibration mounts
Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
Uses standard 3-1/4" x 10" duct connector
3-position discharge - scroll box moveable to adjust to
floor joists
CHIMNEY ASSEMBLY:
Brushed stainless steel cover - just press button to turn
unit "ON"
Chimney rises 9½" when activated - ideal for large pots
and pans
Stylish, stainless steel filters with aluminum mesh - easy
to remove and dishwasher-safe
Stainless steel chimney front and back - makes cleanup
quick and easy
Top cover-mounted, 3-speed control, with delay off and
clean filter reminder
Heat Sentry adjusts speed of blower in case of excess
heat
Conveniently located button - press to lower air vent and
turn unit "OFF"
Remote Control activates downdraft from alternate loca-
tion
TYPICAL SPECIFICATION
Downdraft blower system shall be Best
®
 Model DD0130SS
(DD0136SS) (DD0148SS).
Unit to have steel housing with silver paint finish. Air vent to
rise at least 9½" and have a stainless steel front and back for
ease of cleaning.
Filters to be stainless steel with aluminum mesh, easy to
remove and dishwasher-safe.
Blower will connect directly to 3¼" x 10" rectangular duct (6"
round duct using a transition). Blower discharge to be
convertible to accommodate ductwork from LEFT, RIGHT, or
BELOW and have 7½" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease
resistant anti-vibration mounts, be removable,  and lifetime
lubricated.
Unit to include Heat Sentry, to adjust blower speed in case
of excess heat.
Unit to include remote control activation button.
Downdraft system shall operate on 120 VAC and be able to
be plugged into a standard grounded outlet. It will have a 3-
speed blower control, with delay off, and clean filter re-
minder.
Air delivery shall be no less than 500 CFM. Air delivery rating
shall be certified by HVI. Downdraft blower system to be U.L.
listed.
SPECIFICATIONS
VOLTS
AMPS
CFM
DUCT
120
4.0
500
3-1/4" x 10"
MODELS DD0130SS, DD0136SS,
DD0148SS
DOWNDRAFT
50H
99043191B
HVI2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests
conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory
measurements.
Best by Broan, P.O. Box 140, Hartford, WI 53027