Smeg C36GGNU 安装指导

Instructions for the installer

3. UNPACKING, MOVING AND POSITIONING THE RANGE

CAUTION: This unit is designed as a cooking appliance. For safety purposes, never use it for warming
the room or as a space heater.

- It is recommended that the grates, the griddle plate and burner heads, burner caps, front kick panel

and oven racks be removed to facilitate handling. This will reduce the weight for moving.

- Remove the outer carton and packing material from the shipping base.

- Remove angle-mounting brackets from the range.

- Due to the weight, a dolly/fork lift with soft rubber tread wheels should be used to move this unit. The

weight must be supported uniformly across the bottom.

- The floor under the legs should be protected (wood, strips, carpet, paneling, etc.) before

pushing the unit into position.

- The anti-tip device must be installed, and the gas and electrical connections should be made

before the range is placed in its final position.

- Ensure that the burner caps are correctly positioned on the burner bases on the rangetop.

- Legs should be installed near to where the appliance will be used as they are not secure for long

transit. Keep the unit raised so the legs can be screwed into their couplings, then lower the range
gently to prevent the legs and mounting hardware from being subject to any undue strain. Instead of
tilting the unit, it is recommended that a pallet or lift jack be used.

- For proper performance the range must be leveled. The range is

leveled by adjusting the four legs to ensure that the unit is on a
perfectly level plane. To accomplish this, screw or unscrew the
second part of the legs. The adjustment range of the screw is
1.37 inches (35 mm).

NOTE: this appliance must only use the specific leveling legs provided by the manufacturer.