Fisher & Paykel DD36SDFTX2 快速安装指南

The dishwasher will beep six times to indicate the end of the wash program.

You may notice the following noises at the end of the wash. These are all part of normal operation:

  In double models, both drawers may be draining simultaneously.
  The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan 

assists with drying and uses negligible amounts of energy.

For best drying results, we recommend unloading the dishes once they have cooled. 

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable 
settings before you start using your dishwasher.

A neatly arranged load with evenly
spaced dishes helps wash performance.

Sharp  or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.

Overcrowding reduces wash
performance.

Protruding items will stop the 
internal lid of the drawer from
sealing properly, which could result
in a service call. 

Ensure there is enough space between
plates.  Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.

If plates and cutlery are  nesting,
they are less likely to be cleaned
well.

Ensure that water reaches all items on
the adjustable racks.

Dishware is blocking water from
reaching items on the adjustable
racks.

For detailed information on the
features of your dishwasher

For warranty information

If you…

  have any questions or comments
  need a Fisher & Paykel authorized 

technician to service your product

  need replacement parts or accessories
  want to register your product

Regulates the amount 
of rinse aid dispensed. 
Reduce this setting if 
there is excess foam 
after a wash. Increase 
this setting if dishes are 
wet or streaky after a 
wash.

Refer to the 
‘Water softener’ 
section of the 
‘User guide’ for
details.

Your dishwasher is
factory-set to 
automatically power 
on for 30 seconds 
whenever you open 
the drawer.
You can turn this 
setting off.

Your dishwasher is
factory-set to beep 
six times at the end 
of a wash. You can 
turn this setting off.

When this setting is on,
the drawer will
automatically lock 30
seconds after it’s closed.
It can then be unlocked 
by pressing 

 (unless 

Keylock or Childlock is also 
activated). Useful in boats 
or motor homes.

 

 

Check that there is no wash underway, press 

, then open the drawer.

 

To enter the menu: press the 

 

selector on top first with one finger, then the 

 button on the front with another finger, hold both 

until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu.

If you want to change the Rinse aid setting, go to step 3 now.

If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press 

. To know which option you’re in, watch the lights above 

 and 

 

(see table below). When 

you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

 

Press 

 to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, 

 

you need to press 

 3 times.

 

Press 

 . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

red

unlit

blue

unlit

purple

red

blue

red

red

red

590189A      10.11