GE JT5000EJES 规格指南
Dimensions anD installation information
Dimension and installation
information are shown in inches.
information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 5/15
For answers to your Monogram,
®
GE Profile
™
or GE
®
appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Jt5000eJ
GE
®
30" Built-In Single Convection Wall Oven
Most 30" Wall Cabinets Can be
used With this unit.
note: These ovens are not approved
note: These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must have
an adhesion spec of at least a 194°F
an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
installation inforMation:
installation inforMation:
Before installing, consult installation
instructions packed with product for
current dimensional data.
Side-by-side installations require
at least 2" between cutouts.
current dimensional data.
Side-by-side installations require
at least 2" between cutouts.
KW rating
240V
4.2
208V
3.2
breaKer size
240V
20 Amps
208V
20 Amps
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim
D – Install depth 23-1/2"
E – Overall height with trim
28-5/8"
F – Overall width
29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
D
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim
D – Install depth 23-1/2"
E – Overall height with trim
28-5/8"
F – Overall width
29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
D
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim
D – Install depth 23-1/2"
E – Overall height with trim
28-5/8"
F – Overall width
29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
D
Jt5000
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim
D – Install depth 23-1/2"
E – Overall height with trim
28-5/8"
F – Overall width
29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
D