Viking LVDOT730BK 安装指导

14

Headline

 Performance Checklist – Lower Oven

A qualifi ed installer should carry out the
following checks:

1.  Check oven bake function–bake element 

on full power, center and outside broil 
elements at partial power. Convection 
bake function– bake and broil elements 
the same with the convection fan on.

2.  Check high broil function–both broil 

elements at full power. Convection broil 
function is the same with convection fan 
on.

3.  Check low broil function–inner broil 

element only.

4.  Check self-clean function–Door will lock in 

approximately 30 seconds, the center and 
outside broil elements will turn on and the 
bake element will turn on at partial power. 
Check broil elements through window 
to make sure they are on, then abort 
self-clean cycle to unlock door.

CAUTION: Do not run self-clean cycle check
for more than 10 minutes with the oven racks
and rack supports inside oven to avoid
discoloration due to the high temperature.

Any adjustments necessary that are a result 
of the installer not following instructions will 
be the responsibility of the installer, dealer or 
the end user of the product.

  Control Panel

Speedcook Oven

Lower Oven

Favorites
Food item
Cook mode
Cookbooks
Search

®

02:55

Speedcook 

Oven Light

Clock

Digital 
Display

LED Light 

Ring

USB Port

(Top of Control Panel)

Power Off

 Lower Oven

Speedcook

Oven Lock

Control 

Panel

Lower 

Oven Light

Lower

Oven Lock

Power Off

 Speedcook Oven

Loading the Software

This fi rst time you turn on the oven after installation, the oven will load the software. This process 
should take no longer than 10 minutes. DO NOT attempt to operate the oven while the software 
is loading.