Frigidaire FGGF304DPF 安装指导

4

● Adjustable wrench or channel

  lock pliers

● 5/16" Nutdriver or Flat Head

  Screw Driver 

● Electric Drill & 1/8 Diameter

  Drill Bit (5/32" Masonry Drill
  Bit if installing in concrete) 

● Level & Measuring Tape
for gas supply connection:

● Pipe Wrench

● Brush 

 

● Phillips head 

 and blade-type 

  

screwdrivers

● Open end wrench - 1/2" 
Additional materials you will need

● Gas line shut-off valve 

● Pipe joint sealant that resists action of LP/ Propane 

gas 

Locate the bracket position (right or left side) by placing 
the template symmetrically to the center of the final 
range position. Mark the location of the screw holes, 
shown on template.

● A new flexible metal appliance conduit 

(½" NPT x ¾" or ½" I.D.) must be design 
certified by CSA International. Because 
solid pipe restricts moving the range we 
recommend using a new flexible conduit 
(4 feet length) for each new installation 
and additional reinstallations.

● Always use the (2) new flare union 

  adapters ½" NPT x ¾" or ½" I.D.) supplied 

with the new flexible appliance conduit for 
connection of the range.

To reduce the risk of tipping of the range, the range must be 
secured to the floor by the properly installed anti-tip bracket 
and screws packed with the range. Failure to install the anti-
tip bracket will allow the range to tip over if excessive weight 
is placed on an open door or if child climbs upon it. Serious 
injury might result from spilled hot liquids or from the range 
itself.

If range is ever moved to a different location, the anti-tip 
brackets must also be moved and installed with the range.

Instructions are provided for installation in wood or 
cement floor. When fastening to floor, be sure that 
screws do not penetrate electrical wiring or plumbing.

•  A child or adult can tip the range and 

be killed.

•  Verify the anti-tip device has been 

installed to floor or wall as per 
installation instructions.

•  Ensure the anti-tip device is re-engaged to floor or 

wall when the range is moved.

•  Do not operate the range without the anti-tip device 

in place and engaged.

•  Failure to follow these instructions can result in 

death or serious burns to children and adults.

To check if the anti-tip bracket is installed properly, 
use both arms and grasp the rear edge of range back. 
Carefully attempt to tilt range forward. When properly 
installed, the range should not tilt forward.