OceanAire 2OACH3634 手册
8
CONDENSATE RESERVOIR TANK
For Models 2OACH12, -18, -24 -36, a 5-gallon polyethylene tank is provided standard, to
collect condensate. The tank is located in the lower, front section of the unit. A high
water level cut-out switch is used to stop the compressor and condenser fan automatically
when the tank's pre-set water level has been reached. The evaporator fan will continue to
run, circulating air. The control display will read “CON”
collect condensate. The tank is located in the lower, front section of the unit. A high
water level cut-out switch is used to stop the compressor and condenser fan automatically
when the tank's pre-set water level has been reached. The evaporator fan will continue to
run, circulating air. The control display will read “CON”
TANK LEVEL ADJUSTMENT INSTRUCTIONS
An adjustment screw is provided to vary the cut-off of the tank full switch. If a lighter (less
weight) level of water is desired, turn the adjusting screw clockwise. Do not exceed 6 full
turns counter-clockwise.
weight) level of water is desired, turn the adjusting screw clockwise. Do not exceed 6 full
turns counter-clockwise.
CAUTION, TURN UNIT OFF: BEFORE ADJUSTING SET SCREW
BEFORE
BEFORE
REMOVING
TANK
TO
EMPTY
CONDENSATE
Turn screw clockwise to lower water level. Less water makes tank lighter and easier to
remove.
remove.
NOTE: Max. and Min. water levels shown are those at which the unit will shutdown and
not restart until the condensate tank has been drained.
not restart until the condensate tank has been drained.
Condensate Tank
*Tank Water Level
Adjusting Screw
Spring
Handle
High Water Level
Cut-Out Switch
Condensate
Tank Tray
Cut-Out Switch
Condensate
Tank Tray
Max Water
Level
4" From Top
Level
4" From Top
For 2OACH12, 2OACH18, 2OACH24
and 2OACH36, condensate water
drops from drain pan into trough on
tank
and 2OACH36, condensate water
drops from drain pan into trough on
tank