GE JK5000 规格说明表单
JK5000DF
GE
®
27" Built-In Single Convection Wall Oven
320439
Specification Created 2/13
For answers to your Monogram
®
or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
or call GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
* ADA qualified based on Uniform
Federal Accessibility Standards
*
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: If marks, blemishes or the cutout opening
is visible above the installed oven, it may be
necessary to add wood shims under the runners
and front trim until the marks or openings
are covered.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
must have an adhesion spec of at least a 194°F
temperature rating.
Note: If marks, blemishes or the cutout opening
is visible above the installed oven, it may be
necessary to add wood shims under the runners
and front trim until the marks or openings
are covered.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing,
consult instructions packed with product for
current dimensional data.
consult instructions packed with product for
current dimensional data.
KW Rating
240V 3.6
208V 2.7
208V 2.7
Breaker Size
240V 20 Amps
208V 20 Amps
208V 20 Amps
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
1"
C – Overlap of oven at bottom of cutout
1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim
D – Overall depth with handle 26-23/32"
E – Overall height with trim
30-3/16"
F – Overall width
26-23/32"
PK7000
JK5000
JK3000
JK1000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
1"
C – Overlap of oven at bottom of cutout
1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim
D – Overall depth with handle 26-23/32"
E – Overall height with trim
30-3/16"
F – Overall width
26-23/32"
PK7000
JK5000
JK3000
JK1000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
1"
C – Overlap of oven at bottom of cutout
1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim
D – Overall depth with handle 26-23/32"
E – Overall height with trim
30-3/16"
F – Overall width
26-23/32"
PK7000
JK5000
JK3000
JK1000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
8-3/4"
MAX.
Cutout depth
23-1/2" MIN
Cabinet 27"
A – Overlap of oven at top of cutout
A – Overlap of oven at top of cutout
1"
B – Overlap of oven over side of edges of cutout
1"
C – Overlap of oven at bottom of cutout
1"
Oven
D – Overall depth with handle 26-23/32"
E – Overall height with trim
D – Overall depth with handle 26-23/32"
E – Overall height with trim
30-3/16"
F – Overall width
26-23/32"
PK7000
JK5000
JK3000
JK1000
JK5000
JK3000
JK1000
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-5/8" MIN.
28-1/8" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
JK5000