Maytag MEC7430BW 安装指导

IMPORTANT: Use the 3-wire cable from power supply where 
local codes permit connecting the frame-ground conductor to 
the neutral (white) junction box wire:

1. Disconnect power.

2. Remove junction box cover if present.

3. Connect the flexible, cable conduit from the cooktop to the 

junction box using UL listed or CSA approved conduit 
connector.

4. Tighten screws on conduit connector, if present.

5. Connect the two black wires together using the UL listed wire 

connectors.

6. Connect the two red wires together using the UL listed wire 

connectors.

7. Connect the green or bare and white cooktop cable wires to 

the white (neutral) wire in the junction box using the UL listed 
wire connectors.

8. Install junction box cover.

9. Reconnect power.

IMPORTANT: Use the 4-wire cable from power supply where 
local codes do not permit connecting the frame-ground 
conductor to the neutral (white) junction box wire:

1. Disconnect power

2. Remove junction box cover if present.

3. Connect the flexible cable conduit from the cooktop to the 

junction box using a UL listed or CSA approved conduit 
connector.

4. Tighten screws on conduit connector, if present.

5. Connect the two black wires together using the UL listed wire 

connectors.

6. Connect the two red wires together using the UL listed wire 

connectors.

7. Connect the green or bare ground wire from the cooktop 

cable to the green or bare ground wire (in the junction box) 
using the UL listed wire connectors.

8. Put a UL listed wire connector on the end of the white wire.

NOTE: Do not connect the bare ground wire to the neutral 
(white) wire in the junction box.

9. Install junction box cover.

10. Reconnect power.

B

C

D

E

F

H

A

G

I

A

B

C

D

E

F

H

G

I