InSinkErator HWTF1000S 规格说明表单
2 1/4"
6-1/8"
12 1/2"
10-7/8"
6-3/4"
Stainless Steel Tank dispenses filtered
near-boiling 200˚F water instantly
near-boiling 200˚F water instantly
Water dispenser sold separately
Model
HWT-F1000S
Submittal Sheet
Job Specifications
Specifications
Instant Hot Water Dispensers
Printed in USA
HWD442-13D-45-10
Dimensions
• 2/3 gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
protection to ease installation
• Provides 60 cups/hour of near-boiling water
• F-1000S Filtration System included for
fresher tasting water
fresher tasting water
- Reduces particulates, chlorine taste and
odor for clean, refreshing taste
odor for clean, refreshing taste
- Sanitary, quick-change filter cartridge
makes replacement easy
makes replacement easy
• 115 volts, 750 watts, 6.25 amps
• For use with InSinkErator
instant hot water dispensers
instant hot water dispensers
(excluding model Hot1)
Capacity
Thermostat
2/3 gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
steel tank dispenses
60 cups of 200˚F
water per hour
Electrical
115 volts, A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Insulation
Recommended
Supply Pressure
Supply Pressure
Shipping Weight
Approximately
7.7 lbs.
7.7 lbs.
30-125 psi
Meets U.L. 94HF-1
flammability
specification
flammability
specification
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Sample Specification
The Next
Necessity
™
1-800-558-5700
USA
Canada
www.insinkerator.com
1-800-561-1700
www.insinkerator.ca
Complies with
California Lead
Plumbing Law
California Lead
Plumbing Law
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2013 InSinkErator, a business unit of
Emerson Electric Co. All Rights Reserved.
Instant hot water dispenser(s) shall
be equipped with an InSinkErator
Model HWT-F1000S stainless steel tank
with filtration, adjustable temperature
from 160°F to 210°F and instant,
self-closing hot valve.
be equipped with an InSinkErator
Model HWT-F1000S stainless steel tank
with filtration, adjustable temperature
from 160°F to 210°F and instant,
self-closing hot valve.
In-Home Parts and Service Warranty*
Tank: 3-years
Filtration System: 1-year
Tank: 3-years
Filtration System: 1-year
(excluding replaceable filter cartridge)
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
booklet packed with each unit.
US Pat. D532,497 S (tank enclosure)