Frigidaire FGEF306TPF 安装指导

3

To reduce the risk of tipping of the range, the range must 
be secured to the floor by the properly installed anti-tip 
bracket and screws packed with the range. Failure to 
install the anti-tip bracket will allow the range to tip over 
if excessive weight is placed on an open door or if child 
climbs upon it. Serious injury might result from spilled hot 
liquids or from the range itself.

If range is ever moved to a different location, the anti-
tip brackets must also be moved and installed with the 
range.

Instructions are provided for installation in wood or 
cement floor. When fastening to floor, be sure that 
screws do not penetrate electrical wiring or plumbing.

For leveling legs and Anti-Tip Bracket:
•   Adjustable wrench or channel lock pliers
•   5/16" Nutdriver or Flat Head Screwdriver
•   Electric Drill & 1/8" Diameter
  Drill Bit (Masonry Drill Bit if
  installing in concrete)
•   Level & Measuring Tape

For electrical supply connection:
•   1/4" & 3/8" Socket driver or Nutdriver

Additional Materials You Will Need:
•   Power Supply Cord or
•   Copper Electrical Wiring & Metal 

Conduit (for hard wiring)

 - 

Locate the bracket position (right or left side) by placing 
the template symmetrically to the center of the final 
range position. Mark the location of the screw holes, 
shown on template.

•  A child or adult can tip the range and 

be killed.

•  Verify the anti-tip device has been 

installed to floor or wall as per 
installation instructions.

•  Ensure the anti-tip device is re-engaged to floor or 

wall when the range is moved.

•  Do not operate the range without the anti-tip device 

in place and engaged.

•  Failure to follow these instructions can result in 

death or serious burns to children and adults.

To check if the anti-tip bracket is installed properly, 
use both arms and grasp the rear edge of range back. 
Carefully attempt to tilt range forward. When properly 
installed, the range should not tilt forward.