Frigidaire FFTR1715LB 业主指南

下载
页码 13
9
IMPORTANT
Turning the refrigerator/freezer temperature 
control to “0” turns off the compressor and 
prevents the refrigerator from cooling, but 
does not disconnect the power to the light 
bulb and other electrical components. To 
turn off power to your refrigerator, you must 
unplug the power cord from the wall outlet.
NOTE
When first turning refrigerator on,
move control(s) to Normal. This is the 
recommended initial setting. After 24 hours, 
adjust the controls as needed.
IMPORTANT
Your ice maker is shipped from the factory 
with the wire signal arm in the ON position. 
To ensure proper function for your ice maker, 
hook up water supply immediately or turn ice 
maker OFF by lifting the wire signal arm until 
it clicks and locks in the UP position. If the 
ice maker is not turned off and the water 
supply is not connected, the water valve 
will make a loud chattering noise.
Auxiliary Freezer Control 
Normal
Colder
Cold
Refrigerator/Freezer  
Control 
Normal
Cold
Colder
Allow 24 hrs for adjustments
Temperature Adjustment
•  Adjust temperature gradually: move the 
knob in small increments, allowing the 
temperature to stabilize.
Turning the refrigerator/freezer control will 
change temperatures in both compartments. The 
auxiliary freezer control has no effect on electrical 
power to the refrigerator.
To maintain temperatures, a fan circulates air 
in the refrigerator and freezer compartments. 
For good circulation, do not block cold air vents 
with food items.
CONTROLS
ICE SERVICE
If your refrigerator has an automatic ice maker, 
no ice will be produced during the first 24 hours
of operation. Air in new plumbing lines may 
cause the ice maker to cycle two or three times 
before making a full tray of ice. With no usage, 
it will take approximately one to two days to fill
the ice container.
New plumbing connections may cause the first
production of ice cubes to be discolored or have 
an odd flavor. Discard ice made during the first
24 hours. 
Turning your Ice Maker On
After the plumbing connections have been 
completed, the water supply valve must be 
opened. Place the ice container under the ice 
maker, pushing it as far back as possible. Lower 
the wire signal arm to its “down” or ON position.
Turning your Ice Maker Off
To stop the ice maker, lift the wire signal 
arm until it clicks and locks in the “up” or 
OFF position. The ice maker also turns off 
automatically when the ice container is full.
NOTE
Automatic ice makers are also optional 
accessories that may be installed in most 
models at any time. Call your local dealer for 
information.
Cool Down Period
To ensure safe food storage, allow the 
refrigerator to operate with the doors closed 
for at least 8 to 12 hours before loading it with 
food.
ON
OFF
Wire
Signal Arm
Refrigerator & Freezer Controls