Frigidaire DGGF3054KF 业主指南

29

For round style burners, the burner cap lip (See Fig. 1)

should fit snug into the center of burner head and rest

level. Refer to Figs. 2  & 3 for correct and incorrect burner

cap placement. Once in place, you may check the fit by

gently sliding the burner cap from side to side (Fig. 4) to

be sure it is centered and firmly seated. When the burner

cap lip makes contact inside the center of the burner head

you will be able to hear the burner cap click. Please note

that the burner cap should NOT move off the center of the

burner head when sliding from side to side.

Check and be sure that the oval style (some models)

burner cap is correctly positioned. It should rest level on

top of oval burner head.

It is very important to be sure that all surface burner caps

and burner grates are properly installed and in the correct

locations BEFORE operating the cooktop burners.

To prevent flare-ups and avoid creation of harmful

by-products, do not use the cooktop without all burner

caps properly installed to insure proper ignition and gas

flame size.

Burner cap lip

Burner

cap

Burner head

Fig. 3

Fig. 1

Fig. 2

Fig. 4

It is important to routinely clean the cooktop. Keeping the

cooktop surface clean after each use will help avoid soil

buildup from becoming very difficult to remove.

To avoid scratching, wipe with a clean, damp cloth and wipe

dry. If a spill occurs on or in the recessed or contoured

areas of the cooktop, blot up spill with an absorbent cloth.

Rinse with a clean, damp cloth and wipe dry.

• Always keep all surface burner caps in place

whenever operating any surface burner.

• When placing the burner caps, be sure that all

burner caps are seated firmly and rest level on top

burner heads.

• To avoid possible burns DO NOT attempt any of the

cooktop or surface burner cleaning instructions

provided before turning OFF all of the surface

burners and allow them time to cool.

• Any additions, changes or conversions required in

order for this appliance to satisfactorily meet the

application needs must be made by an authorized

qualified Agency.