Monster 133257 快速安装指南
HERE ARE SOME HELPFUL TIPS FOR GETTING TO KNOW YOUR MICRO
GETTING STARTED
Make sure your fully charge your Micro. The first time you power up a new Micro it will simply turn on -
the power switch is on the rear. Micro will emit a turn-on tone.
the power switch is on the rear. Micro will emit a turn-on tone.
TO PAIR TO YOUR DEVICE
After you power up your Micro, press and hold the multi-function button “O” on the top of the Micro.
The LED will flash red to blue and you will hear a sonar sound. You can then release the button. Enable
the Bluetooth function on your device just like you would to pair a wireless headset. Look for “Monster
Micro” on your device and select it to connect. You will hear voice prompts to guide you until this
process is finished. It may continue for a few seconds after you connect.
The LED will flash red to blue and you will hear a sonar sound. You can then release the button. Enable
the Bluetooth function on your device just like you would to pair a wireless headset. Look for “Monster
Micro” on your device and select it to connect. You will hear voice prompts to guide you until this
process is finished. It may continue for a few seconds after you connect.
Micro will say “your device is connected” and emit a chime tone.
After the initial connection, each time you turn on your Micro it will seek the last device it was connected
to. If the device is turned on and in range it will connect automatically. Micro will narrate the process
and emit a chime tone when completed.
to. If the device is turned on and in range it will connect automatically. Micro will narrate the process
and emit a chime tone when completed.
Please wait for the pairing process or the re-connect process to complete before operating the Micro.
HOW TO USE THE VOICE COMMANDS
Micro comes with voice commands off. To activate voice commands, hold + and – buttons together
for about 5 seconds. Micro will say “the voice command is on”.
for about 5 seconds. Micro will say “the voice command is on”.
To turn off voice commands repeat the process – Micro will say “the voice command is off”.
You will still get voice acknowledgments of certain functions at all times – these are not part of the
voice commands.
voice commands.
Say the trigger word “HELLO MONSTER MICRO” before EVERY voice command.
This is designed so that you can’t accidentally give micro a command to do something. Micro will NOT
respond without the trigger command first.
This is designed so that you can’t accidentally give micro a command to do something. Micro will NOT
respond without the trigger command first.
When Micro says “say a command” pause for a heartbeat before you issue the command. Speak
clearly, and normally, you do not have to yell.
clearly, and normally, you do not have to yell.
For a list of commands, when Micro says “say a command” respond with “what can I say” and Micro
will recite the list of commands for you.
will recite the list of commands for you.
MICRO
™