Amana AFI2539ERM-SS 使用和维护

The disposable water filter should be replaced at least every 
6 months. If the water flow to the water dispenser or ice maker 
decreases noticeably before 6 months have passed, replace the 
water filter more often. To change the filter, see “Water Filtration 
System.”

After changing the water filter, reset the water filter status. On the 
display screen, press and hold FILTER RESET for 3 seconds. The 
status light will change from Replace Filter (red) to Normal (blue 
water) when the system is reset. 

To purchase a replacement water filter, model number 
UKF8001AXX-200, contact your dealer or call 1-800-422-9991 
in the U.S.A. or 1-800-807-6777 in Canada.

IMPORTANT: Air trapped in the water system may cause water 
and filter to eject. Always dispense water for at least 2 minutes 
before removing the filter or blue bypass cap. 

1. To access the filter, press upward on the ribbed section of the 

water filter cover.

2. Turn filter counterclockwise to remove.

3. Remove sealing label from replacement filter and insert the 

filter end into the filter head.

4. Turn the filter clockwise until it stops. Snap the filter cover 

closed.

5. Flush the water system. See “Water and Ice Dispenser.”

NOTE: The dispenser feature may be used without a water filter 
installed. Your water will not be filtered. If this option is chosen, 
replace the filter with the blue bypass cap.

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid odor 
buildup. Wipe up spills immediately.

■

Because air circulates between all compartments, any odors 
formed in one compartment will transfer to the other. You must 
thoroughly clean all compartments to eliminate odors. To 
avoid odor transfer and drying out of food, wrap or cover 
foods tightly.

■

Do not use abrasive or harsh cleaners such as window sprays, 
scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, nail polish remover, bleaches or 
cleansers containing petroleum products. Do not use paper 
towels, scouring pads, or other harsh cleaning tools that may 
scratch or damage the materials.

1. Unplug refrigerator or disconnect power.

2. Using a clean sponge or soft cloth and a mild detergent in 

warm water, hand wash, rinse, and dry removable parts and 
interior surfaces thoroughly.

3. Plug in refrigerator or reconnect power.

1. Make sure the refrigerator is unplugged or the power is 

disconnected before wiping the screen to avoid 
unintentionally changing the settings. 

2. Mix a solution of mild detergent in warm water. Dampen a 

soft, lint-free cloth with the solution and gently wipe the 
screen.

NOTE: Do not spray or wipe liquids directly onto the screen, 
or over-saturate the cloth.

3. Plug in refrigerator or reconnect power. 

1. Unplug refrigerator or disconnect power.

2. Using a clean sponge or soft cloth and a mild detergent in 

warm water, wash, rinse and thoroughly dry stainless steel 
and painted metal exteriors. 

■

To keep your stainless steel refrigerator looking like new 
and to remove minor scuffs or marks, it is suggested that 
you use the manufacturer’s approved Stainless Steel 
Cleaner and Polish, Part Number 4396095. To order the 
cleaner, call 1-800-422-9991 U.S.A. or 1-800-807-6777 
Canada.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come 
into contact with any plastic parts such as the trim pieces, 
dispenser covers or door gaskets. If unintentional contact 
does occur, clean plastic part with a sponge and mild 
detergent in warm water. Dry thoroughly with a soft cloth.

3. Plug in refrigerator or reconnect power.

There is no need for routine condenser cleaning in normal home 
operating environments. If the environment is particularly greasy 
or dusty, or there is significant pet traffic in the home, the 
condenser should be cleaned every 2 to 3 months to ensure 
maximum efficiency.

To clean the condenser:
1. Unplug refrigerator or disconnect power.

2. Remove the base grille.

3. Use a vacuum cleaner with a soft brush to clean the grille, the 

open areas behind the grille and the front surface area of the 
condenser.

4. Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

IMPORTANT: The light bulbs in both the refrigerator and freezer 
compartments of your new refrigerator use LED technology. If the 
lights do not illuminate when the refrigerator and/or freezer door 
is opened, call for assistance or service. See “Warranty” for 
phone numbers.

1. Unplug the refrigerator or disconnect power.

2. Remove the light shield (on some models).