Amana AFI2539ERM-SS 使用和维护

For your convenience, your refrigerator and freezer controls are 
preset at the factory. When you first install your refrigerator, make 
sure that the controls are still set to the “mid-settings.” The factory 
recommended set points are 38°F (3°C) for the refrigerator and 
0°F (-18°C) for the freezer.

■

Wait 24 hours before you put food into the refrigerator. If you 
add food before the refrigerator has cooled completely, your 
food may spoil.

NOTE: Adjusting the set points to a colder than 
recommended setting will not cool the compartments any 
faster.

■

If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.

■

The preset temperatures should be correct for normal 
household usage. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.

■

Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.

To view and adjust the set points, press and hold the TEMP 
button for 3 seconds. When adjust mode is activated, adjusting 
information will appear on the display screen. 

NOTE: To view Celsius temperatures, press the LIGHT button 
when adjust mode is activated. To return the display setting to 
Fahrenheit, press LIGHT again.

■

When adjust mode is activated, the display screen shows the 
refrigerator set point and “FRIDGE” appears. 

■

Press LOCK to raise the set point, or press FAST COOL to 
lower the set point.

■

When you have finished viewing (and adjusting if desired) the 
refrigerator set point, press TEMP to change the display to 
show the freezer set point. When the zone has been changed, 
“FREEZER” appears on the display screen.

■

Press LOCK to raise the set point, or press FAST COOL to 
lower the set point.

■

When you have finished viewing (and adjusting if desired) both 
the refrigerator and freezer set points, press FILTER to save 
the settings. 

NOTE: To exit without saving changes, press ICE TYPE at 
any time while in adjust mode, or allow about 60 seconds of 
inactivity and adjust mode will turn off automatically.

When adjusting temperature set points, use the following chart as 
a guide.      

The set point range for the refrigerator is 33°F to 45°F (0°C to 
7°C). The set point range for the freezer is -5°F to 5°F (-21°C to 
-15°C). 

Your refrigerator and freezer will not cool when cooling is 
turned off.

■

To turn cooling off, press and hold the LOCK and FILTER 
buttons at the same time for 3 seconds. When cooling is off, 
“COOLING OFF” will appear on the display screen. 

IMPORTANT: To avoid unintentionally locking the dispenser 
or changing other settings, be sure to press both buttons at 
exactly the same time.

Press and hold LOCK and FILTER for 3 seconds again to turn 
cooling back on.

The Fast Cool feature assists with periods of high refrigerator 
use, full grocery loads, or temporarily warm room temperatures. 

■

Press FAST COOL to set the freezer and refrigerator to the 
lowest temperature setting. When the feature is on, the Fast 
Cool icon will appear on the dispenser display screen. The 
Fast Cool feature will remain on for 24 hours unless manually 
turned off. 

■

To manually turn off the Fast Cool feature, press FAST COOL 
again or adjust the refrigerator temperature set point. The Fast 
Cool icon will disappear when the feature is off.

NOTE: Setting the freezer to a colder temperature may make 
some foods, such as ice cream, harder.

REFRIGERATOR too cold

REFRIGERATOR Setting
1° higher 

REFRIGERATOR too warm REFRIGERATOR Setting

1° lower

FREEZER too cold

FREEZER Setting
1° higher

FREEZER too warm /
Too little ice

FREEZER Setting
1° lower

A