Samsung bd-h6500 业主指南

| NOTE |

 

The upgrade is complete when the product turns 
off, and then turns on again by itself.

 

Samsung Electronics shall takes no legal 
responsibility for product malfunction caused by 
an unstable Internet connection or consumer 
negligence during a software Update.

 

If you want to cancel the upgrade while the upgrade 
software is downloading, press the v button.

 

When a system upgrade is in progress, "UPDATE" is 
displayed on the front panel.

You can use Update Now to update the 

software through your network connection 
or by using a USB flash drive. The network 
instructions are below. The USB flash drive 
instructions are on the next page.

1.  Select Update Now, and then press the 

 button. 

The Update now pop-up appears.

2.  The product searches on line for the latest 

software version.

3.  If it finds a new version, the Update 

Request pop-up appears.

4.  Select OK. The product upgrades the 

software, turns off, and then turns on 
automatically.

5.  If you do not select OK or Cancel in one 

minute, the product stores the new 
upgrade software. You can upgrade the 
software later using Auto Update.

6.  If you select Cancel, the product cancels 

the upgrade.

| NOTE |

 

When the system upgrade is done, check the 
software details in the Product Information section 
of the Contact Samsung screen.

 

Do not turn off the product during the Software 
Update. It may cause the product to malfunction.

You can set the Auto Update function so that 

the product downloads new upgrade software 
when it is in Auto Update mode. 
In Auto Update mode, the product is off, but 
its Internet connection is active. This allows 
the product to download upgrade software 
automatically, when you are not using it.

1.  Press the ▲▼ buttons to select Auto 

Update, and then press the 

 button.

2.  Select On. Then the product will be 

updated automatically  after power off. If 
it downloads new upgrade software, the 
product will ask you if you want to install 
it when you turn the product on.

| NOTE |

 

To use the Auto Update Mode Upgrade function, 
your product must be connected to the Internet.

To upgrade by USB, follow these steps:

1.  Visit www.samsung.com.
2.  Click SUPPORT on the top right of the 

page.

3.  Enter the product's model number into 

the search field. As you enter the model 
number, a drop down will display products 
that match the model number.

4.  Left click your product's model number in 

the drop down list.

5.  On the page that appears, scroll down 

to and then click Firmware Manuals & 
Downloads.

6.  Click Firmware in the center of the page.
7.  Click the ZIP button in the File column on 

the right side of the page.

8.  Click Send in the first pop-up that 

appears. Click OK in the second pop-up 

to download and save the firmware file to 
your PC.