Samsung ME18H704SFG/AA 安装指导

13

3.  Remove the screw that holds the blower motor 

and carefully pull out the blower unit. The wires 

will extend far enough to allow you to adjust the 

blower unit.

CAUTION: To avoid breaking or cracking the blower 

blade, do not touch the blade. Hold the outer case 

of the blower when you pull it out or put it back in 

place.

4.  Roll the blower unit 90 ° so that the fan blade 

openings are facing toward the front of the 

microwave.

5.  Place the blower unit back into the opening.

CAUTION: Do not pull or stretch the blower unit 

wiring. Make sure the wires are not pinched.

6.  Secure the blower unit to the microwave with the 

screw.

1.  Remove the screws on the top of the grille using 

a #1 Phillips screwdriver.

2.  Open the door.
3.  Remove the grille.

•  Push the grille left, and then pull the grille straight 

off.

4.  Install the charocal filter. When properly installed, 

the wire mesh of the filter should be visible from 

the front.

5.  Reinstall the grille and the screws.
6.  Close the door.

SMH1927_XAA_DE68-04108A-02_EN_120725.indd   13

5/3/2013   8:45:22 AM