Maytag MEDC215EW-WW 手册

Along with heat, dryers require good air flow to efficiently 

dry laundry. Proper venting will reduce your drying times and 

improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in 

good air flow. Blocked or crushed vents as well as improper 

venting installation will reduce air flow and dryer performance.
Service calls caused by improper venting are not covered by 

the warranty and will be paid by the customer, regardless of 

who installed the dryer. To clean or repair venting, contact a 

venting specialist.

Use the Sensor Dry/Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During  

Sensor Dry/Automatic Dry cycles, drying air temperature or moisture level is sensed in the load. This sensing occurs throughout  

the drying cycle and the dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal 

energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.  

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

 

■

Cleaning your lint screen before each load.

 

■

Replace plastic or foil vent material with 4" (102 mm)  

diameter heavy, rigid vent material. 

 

■

Use the shortest length of vent possible. 

 

■

Use no more than four 90° elbows in a vent system;  

each bend and curve reduces air flow.

 

■

Remove lint and debris from the exhaust hood.

 

■

Remove lint from the entire length of the vent system at least 

every 2 years. When cleaning is complete, be sure to follow 

the “Installation Instructions” supplied with your dryer for 

final product check.

 

■

Clear away items from the front of the dryer.