GE PSSF3RGZCC 数据表

18

Unplug the refrigerator.

The bulbs are located at the top of  the

compartment, inside the light shield. On

some models, a screw at the front 

of  the light shield will have to be removed.

On other models, the screw 

is located in the pocket located 

at the back of  the light shield. 

To remove the light shield, on some

models, press in on the tabs on the sides of

the shield and slide forward and out. On

other models, just slide 

the shield forward and out.

After replacing the bulb with an appliance

bulb of  the same or lower wattage, replace

the light shield and screws (on some

models). When replacing the light shield,

make sure that the tabs at the back of  the

shield 

fit into the slots at the back of  the light

shield housing.

Plug the refrigerator back in.

Unplug the refrigerator.

Remove the convertible meat drawer

control knob by pulling straight out. 

Lift the light shield up and pull it out.

After replacing the bulb with an appliance

bulb of  the same or lower wattage, replace

the shield and 

the knob.

Plug the refrigerator back in.

Unplug the refrigerator.

Remove the shelf  just above the light

shield. (The shelf  will be easier to remove if

it is emptied first.) On some models, a

screw at the top of  the light shield will need

to be removed.

To remove the light shield, press in 

on the sides, and lift up and out.

Replace the bulb with an appliance bulb

of  the same or lower wattage, and

reinstall the light shield. When

reinstalling the light shield, make sure

the top tabs snap securely 

into place. Replace the screw 

(on some models).

Reinstall the shelf  and plug the

refrigerator back in.

Unplug the refrigerator.

The bulb is located on the dispenser under

the control panel.

Remove the light bulb by turning

it counterclockwise.

Replace the bulb with a bulb of  the

same size and wattage.

Plug the refrigerator back in.

Tabs

Pocket