Linksys RE2000 业主指南

 

Linksys Wireless-N Range Extender

Wi-Fi Protected Setup™ makes it easy to connect your extender to your network, 

then connect other devices to your network through the extender.

 

•

When the Wi-Fi Protected Setup process is active, the light flashes slowly. 

When the Wi-Fi Protected Setup is successful, the light is continuously lit.

 

•

If there is an error, the light flashes quickly for two minutes; please wait 

and try again.

 

•

Wait until the light is continuously lit before starting the next Wi-Fi 

Protected Setup session.

If your access point or router supports it, you can use Wi-Fi Protected Setup 

to connect the range extender to the access point or router. Choose from the 

setup methods below to connect the extender.

If you have an access point or a router that do not support Wi-Fi 

Protected Setup, note the wireless settings, and then manually 

configure the extender.

Use this method if your router or access point has a Wi-Fi Protected Setup 

button.

1.  Click or press the Wi-Fi Protected Setup button on the extender.
2.  Click the Wi-Fi Protected Setup button on the router’s Wi-Fi Protected 

Setup screen (if available), OR press and hold the Wi-Fi Protected Setup 

button on the router for one second. When the connection is complete, 

the Wi-Fi Protected Setup light on the extender is continuously lit.

3.  If you used the extender’s Wi-Fi Protected Setup screen, click OK in that 

screen within two minutes.

The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found 

on the product label of the extender. You can use this method only if your 

router’s administration utility has a Wi-Fi Protected Setup menu.

1.  Enter the extender’s PIN into the appropriate field on the router’s Wi-

Fi Protected Setup screen, then click Register.  When the connection is 

complete, the Wi-Fi Protected Setup light on the extender is continuously 

lit.

2.  Click OK.