Maytag MEDB725BW 业主指南

Press and hold the START/PAUSE button to begin the cycle.

Promptly remove garments  

after cycle has completed to  

reduce wrinkling. If you will  

be unable to remove the load  

promptly, select the Wrinkle  

Prevent/Wrinkle Prevent with  

Steam option before pressing  

Start/Pause.

You may adjust different settings, depending on whether you 

have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. 

See the “Cycle Guide” for detailed information.
NOTE: Not all options and settings are available with all cycles. 

Not all cycles are on all models.
Sensor Cycles:

You can select a different Dryness Level, depending on your 

load, by pressing the Dryness Level button. Selecting Very, 

More, Normal, Less, or Damp automatically adjusts the  

Dryness Level at which the dryer will shut off. Once the  

Dryness Level is set, it cannot be changed without stopping 

the cycle.
Sensor cycles give the best drying in the shortest time.  

Drying time varies based on fabric type, load size, and  

dryness setting.
Timed Cycles:

When you select a Timed Cycle, the  

default time appears in the display. Use  

the 

+ and - buttons to increase or decrease 

the time in 1 minute increments. Press  

and hold to change the time in 5 minute 

increments. 
The default temperature may be changed  

by pressing the Temp Level button until the 

desired dry temperature is lit.
Steam Cycles: 

Reduces odors and light wrinkles from small to medium-sized 

loads of dry items. Dry time will automatically adjust when 

the load size is sensed. Medium or High Temp Levels may be 

selected.
Custom Refresh with Steam:

This cycle is best for reducing wrinkles and odors from dry  

garments. Select the number of garments to be refreshed. 

Cycle time will increase depending on number of garments 

selected.

Add additional options such as Reduce Static, Wrinkle Prevent, 

Wrinkle Prevent with Steam and/or Steam Boost  

by pressing the button for that option.
NOTE: Not all options and settings are available with all cycles.

Steam model shown

Steam model shown

If all your loads on all Sensor Cycles are consistently not  

as dry as you would like or are too dry, you may change the 

default settings to increase or decrease the default dryness 

level.
Your sensor drying settings can be adjusted to adapt to 

different installations, environmental conditions or personal 

preference. This change is retained and will affect all of your 

sensor cycles, not just the current cycle/load.  

 

There are 5 drying settings, they will appear in the time 

display:

01  Factory preset dryness level.

02  Slightly drier clothes, 15% more drying time.

03  Much drier clothes, 30% more drying time.

04  Much damper clothes, 30% less drying time. 

05  Slightly damper clothes, 15% less drying time.

NOTE: The settings cannot be changed while the dryer  

is running or paused. The dryer must be in standby mode  

(the Power button is off) to adjust the default settings.

1.  Before starting a cycle, press and hold the Dryness 

Level button for 6 seconds. 

2.  Press the Dryness Level button to select the dryness 

level shown in the time display: 01, 02, 03, 04, or 05. 

3.  Press START/PAUSE to save the new dryness level  

setting. 

Steam model shown

Steam model 

Non-steam  
model