Samsung RF32FMQDBSR 业主指南

 

operating

CHANGING THE WATER FILTER

•  To reduce risk of water damage to your 

property DO NOT use generic brands 
of water filters in your SAMSUNG 
Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTERS. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to, property 
damage caused by water leakage from the use of 
a generic water filter. SAMSUNG Refrigerators are 
designed to work ONLY WITH SAMSUNG Water 
Filter.
The Filter light turns red to let you know 
when it is time to change your water 
filter cartridge.
To give you time to get a new filter, 
the red light comes on just before the 
capacity of the current filter runs out. 
Changing the filter on time provides you with the 
freshest, cleanest water from your refrigerator.

1.    Shut off the water supply. Then, turn the water 

filter ( 

1 ) about 1/4 turn, counter-clockwise.

2.   Pull the water filter ( 1 ) from the case filter ( 2 ).

2

1

•  To change the water filter more easily, 

shut off the water supply valve.

•   Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it to 
stick. If you are having difficulties, grip the water 
filter firmly and pull it hard.

•   When you pull out 

the water filter, a little 
water can leak from 
the opening. This is 
normal. To minimize 
the water leaks, keep the filter cartridge 
horizontal when you pull it.

•  To prevent overflow, empty the water filter tray       

( 

3 ) and dry around the filter case ( 2 ).

3.   Insert the new filter into the filter case ( 4 ).

4.  Push the filter in, and then turn it clockwise until 

it locks.

•   If you have trouble inserting the water 

filter because of high water pressure, 
shut off the water supply valve.

•  The locked symbol should be lined up 

with the indicator line.

4

5.  Touch the “Alarm/hold 

3 sec for Filter Reset” 
button (

(Filter Reset)

) for about 

3 seconds to reset the 
water filter. The color of the 
indicator ( 

 ) changes from red to off.

6.  If you turned off the water supply, turn it back 

on.

•  For a replacement water filter, visit your 

local home Improvement center, go to 
SamsungParts.com on line, or contact 
your authorized Samsung dealer.  
Be sure the replacement water filter has 
the SAMSUNG logo on the box and on 
the water filter.

Removing any residual matter inside the 
water supply line after installing the water 
filter.

1.  Turn ON the main water 

supply and supply water 
from water supply line.

2.  Run water through the 

dispenser until the water 
runs clear (approx. 6 to 7 
minutes). This will clean 
the water supply system and remove air from 
the lines.

3.  Additional flushing may be required in some 

households. 

4.  Open the Refrigerator door and make sure 

there are no water leaks coming from the water 
filter.

•   Be sure to flush the dispenser thoroughly, 

otherwise water may drip from the 
dispenser.  
This means that there is still air in the line.

(Red)

3

2

DA68-02918A-01.indb   18

13. 4. 25.   �� 2:31