Whirlpool WGD7300DW-WW 业主指南

Control Panel and Features

Touch to turn the dryer on and off. Touch to stop/cancel  

a cycle at any time.  

First select a cycle from the “What to Dry” (Automatic 

cycles) and then select the “How to Dry” to get the best 

combination cycle available for the type of items you are 

going to dry. See “Cycle Guide” for cycle details.

Touch and hold until the LED comes on to start a cycle,  

or touch once while a cycle is in process to pause it.

When you select a cycle, its default settings will light up 

and the Estimated Time Remaining (for Automatic Cycles) 

will vary depending on “What to Dry” and “How to Dry” 

selections or actual time remaining for Timed Dry cycles 

(for Manual Cycles) will be displayed. 

Not all features and cycles are available on all models.

Use to select available modifiers for your dryer. Not all 

cycles and options are available on all models.

When using Timed Dry Cycle, you may select a dry 

temperature based on the type of load you are drying. 

Use the warmest setting safe for the garments in the 

load. Follow garment label instructions.
NOTE: Automatic Cycles will give you up to  

3 temperatures to adjust and it varies, depending  

on the “What to Dry” or “How to Dry” selections that 

have been made. 
Dryness

You may adjust the Dryness on Automatic Cycles 

(except for the Sanitize cycle), if desired. 
NOTE: Dryness is for use with Automatic Cycles only. 
+\- Timed Dry Adjust

Touch “+” or “–” with Timed Dry cycle to increase or 

decrease the length of the cycle. 

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. 

To ensure your selections are registered, touch the control panel with your finger tip, not your 

fingernail. When selecting a setting or option, simply touch its name.