Whirlpool WDF775SAYB 业主指南

To avoid unintended 
use of your 
dishwasher, or cycle 
and option changes 
during a cycle.

To turn on Lock, press and hold Control Lock for at least 
3 seconds. 

To turn off Lock, press and hold Control Lock for at least 
3 seconds. 

When Control Lock is lit, all buttons are disabled. If you press any 
pad while your dishwasher is locked, the light flashes 3 times. The 
dishwasher door can be opened while the controls are locked. 

Anytime

Press to start or 
resume a wash cycle

If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator 
flashes. The cycle will not resume until the door is closed and Start/Resume is pressed.

Press to cancel 
wash cycle 

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher 
drain completely.

To follow the 
progress of your 
dishwasher cycle

Clean indicator glows when a cycle is finished. 

If you select the Sani Rinse option, when the Sani Rinse cycle is finished, the “Sanitized” 
indicator glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the 
end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated to 
the required temperature. The light goes off when you open and close the door or press 
CANCEL.