Frigidaire FPRU19F8RF 用户手册

11

The sensor alert signals you that a problem exists with a temperature sensor. The audible alarm 

will sound after 1 hour and the display will alternate between “E8” or “E9” and 33°F (1°C) at ½ 

second intervals. The control will then enter a mode that runs the refrigerator in a manner that 

maintains the factory set cabinet temperature.
The audible alert can be turned off by pressing the Alert RESET key. 

The stuck key alert will sound if the control reads a keypress for longer than 30 seconds. The 

audible alert will sound and will be limited to one minute and will stop automatically. The display 

will alternate between “E7” and 33°F (1°C) at ½ second intervals. The control will then enter a 

mode that runs the refrigerator in a manner that maintains the factory set cabinet temperature 

until the condition is resolved. 
The audible alert can be turned off by pressing the Alert RESET key.   

Your new Pure Advantage air filter is located inside one of the 2-Liter Door Bins. The air filter cover 

is located on the upper right side of the control box.  In general, you should change the air filter with 

Part Number “EAFCBF” every 6 months to ensure optimal filtering of freezer odors. The replacement 

air filter can be purchased on the Frigidaire website (http://frigidaire.stores.yahoo.net) or call toll free 

in the U.S. and Canada: 1-800-599-7569. Your electronic control is equipped with a Replace Air Filter 

indicator to remind you to change your filter.  
To Install Or Replace The Air Filter

•  Pull down on the front of the Pure Advantage™ air filter cover to release the hinged bottom 

cover.

•  Allow bottom cover to swing open and then remove the old filter and discard it.
•  Unpackage the new filter and place it inside the hinged bottom cover of the housing.
•  Push the hinged bottom cover upward until the tab snaps into closed position.

replace air filter

hold to reset

press & hold

air

filter

temp

mode

alarm

off

control

lock

Air Filter