Yamaha ysp-1600bl 业主指南

PREPARATIONS

➤ b Connecting a TV

En

Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.

• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.

• For playback of 3D and 4K video content, use a high-speed HDMI cable.

Connect the TV to the unit with an HDMI cable (not supplied).

• This unit supports HDCP version 2.2, a copy protection technology. To enjoy playback of 4K video, connect 

the unit to the HDMI IN jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.

When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI 
control function (p. 51).

• Use an ARC-compatible HDMI cable.

Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.

Use a 3.5 mm stereo mini plug cable to connect the unit to the TV via the ANALOG input jack on the unit 
and the audio output jack on the TV. TV audio can be played through this unit by switching input to 
ANALOG using the ANALOG key on the remote control.

b Connecting a TV

ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio 
signals from the TV can be input to this unit via the same HDMI cable used to output video signals from 
this unit to the TV.

HDMI

HDMI

The unit (rear)

HDMI OUT (ARC) jack

ARC-compatible 

HDMI input

TV

HDMI

HDMI

O

O

The unit 
(rear)

HDMI OUT (ARC) jack

HDMI input

TV jack

Audio output 

(digital optical)

TV

1. Remove the cap

2. Check the direction of 

the plug