Philips HTL1170B/F7 业主指南

5 Wall mount

Note

•

Improper wall mounting may result in accident, injury or

damage. If you have any query, contact Consumer Care

in your country.

•

Before wall mounting, make sure the wall can support

the weight of your SoundBar.

Screw length/diameter

Depending on the type of wall mounting your

SoundBar, make sure that you use screws of a

suitable length and diameter.

See the illustration in the quick start guide on

how to wall mount the SoundBar.

1) Drill two holes on the wall.

2) Secure the dowels and screws in the holes.

3) Hang the SoundBar on the fastening screws.

3.0-3.5mm/0.12”-0.14”

4mm/

0.16”

>25mm/0.98”

6 Product

specifications

Note

•

Specifications and design are subject to change without

notice.

Amplifier

• FTC total output power 30W

• Left + Right :

30W (1%THD, 8ohm, 100Hz-20kHz)

• RMS total output power:

40W RMS (+/- 0.5 dB, 10% THD)

• Frequency response: 20 Hz-20 kHz / ±3 dB

• Signal-to-noise ratio:

> 65 dB (CCIR) / (A-weighted)

• Input sensitivity:

• AUX: 2Vrms

• AUDIO IN: 1Vrms

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

• Sampling frequency:

• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,

22 kHz, 24 kHz, 32 kHz, 44.1 kHz,

48 kHz

• Constant bit rate:

• MP3: 8 kbps-320 kbps

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class

(MSC)

• File system: FAT16 and FAT32

• Supports MP3 file formats