Maytag MED4200BW 安装指导

64 ft. (20 m)

54 ft. (16.5 m)

44 ft. (13.4 m)

35 ft. (10.7 m)

27 ft. (8.2 m)

58 ft. (17.7 m)

48 ft. (14.6 m)

38 ft. (11.6 m)

29 ft. (8.8 m)

21 ft. (6.4 m)

The “Vent System Chart” provides venting requirements that  

will help achieve best drying performance.

Exhaust vent must be securely fastened to a noncombustible 

portion of mobile home and must not terminate beneath the 

mobile home. Terminate exhaust vent outside. 

 

■

Select route that will provide straightest and most direct  

path outdoors.

 

■

Plan installation to use fewest number of elbows and turns.

 

■

When using elbows or making turns, allow as much room  

as possible.

 

■

Bend vent gradually to avoid kinking.

 

■

Use as few 90° turns as possible.

 

■

Use the following “Vent System Chart” to determine type of 

vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified  

in “Vent System Chart”.
Exhaust systems longer than those specified will:

 

■

Shorten life of dryer.

 

■

Reduce performance, resulting in longer drying times  

and increased energy usage.

Install exhaust hood and use caulking compound to seal 

exterior wall opening around exhaust hood.

NOTE: Side and bottom exhaust installations have a 90° turn 

inside the dryer. To determine maximum exhaust length, add  

one  90° turn to the chart.

This dryer can be converted to exhaust out the right side, left 

side, or through the bottom. If you prefer, you may contact your 

local dealer to have the dryer converted. 

A. Standard rear offset exhaust installation 

B. Left or right side exhaust installation 

C. Bottom exhaust installation

A

B

C