Lorex LNR1141TC4 业主指南

2. Configure the following:

• Device No.: Not supported.
• Language: Set the system languages. Available options are English, French, and

Spanish.

• Video Standard: Select NTSC (North America) or PAL (Europe).
• HDD Full: Select Overwrite for the system to overwrite the oldest recordings when

the hard drive is full or select Stop Record for the system to stop recording when
the hard drive is full.

• Pack Duration: Select how the duration (in minutes) the system will store video

files. For example, if this is set to 30 minutes, the system will create a new video file
for each 30 minutes of continuous recording.

• Instant Playback: Select the amount of time (in minutes) the system will go back

when instant playback is activated in live view.

• Auto Logout: Select the idle time (in minutes) before the system will logout the cur-

rent user.

• Navigation Bar: Check to enable the Navigation Bar that comes up when you left

click in live view.

• Startup Wizard: Check to enable a setup wizard when you start up the system.
• Mouse Sensitivity: Use the slider to adjust the mouse sensitivity.

3. Click OK to save changes.

13.3.20

Setting the Monitor Resolution (Display)

The Display menu allows you to configure the systems monitor resolution and other dis-
play settings.

To set the monitor resolution:

1. From the Main Menu, click

and then click Setting>Display>Display.

2. Under Resolution, select the correct resolution for your monitor: 1920x1080,

1280x1024, 1280x720, or 1024x768.

3. Click OK to save changes. Click OK again to restart the system using the new

resolution.

#LX400070; r. 1.0/27147/27147; en-US