GE JX7230EH-ES 安装指导

 Trim 

Frame 

1

 Bottom 

Duct 

1

 Top 

Bracket 

1

 

Phillips Round-Head 24 

 Screws 

 

 

 

(21 or 22 required 

 

 

 

for installation)

 

Phillips Flat-Head   

5 

 Screws 

 

(4 required

  

 

 

for installation)

 

 

 Anti-Tip 

Bracket 

 

1

 Bottom 

Bracket 

 

1

 Template 

1

or

Visit our Website at:

•

 

 

Save these  

instructions for local inspector’s use.

•

 

 

Observe all  

governing codes and ordinances.

• 

 Be sure to leave these 

instructions with the Consumer.

• 

 Keep these instructions for 

future reference.

•  For easier installation and personal safety, we recommend 

that two people install this microwave oven.

•  Unplug the microwave oven before attempting 

installation of this kit.

•  Skill level – Installation of this appliance requires basic 

mechanical and electrical skills.

•  Completion time – 1-3 hours
•  Proper installation is the responsibility of the installer. 
•  Product failure due to improper installation is not 

covered under the Warranty.

•  This kit is UL listed for installation alone or over  

any General Electric/Hotpoint single electric wall oven.

#2 Phillips 

screwdriver

Pencil

Tape measure

Awl or punch

Drill with 

7

ø

64

” bit or #35

 Before beginning the 

installation, switch power off at service panel and lock 

the service disconnecting means to prevent power from 

being switched on accidentally. When the service 

disconnecting means cannot be locked, securely fasten 

a prominent warning device, such as a tag, to the 

service panel.

Scissors (optional)